Deals
Showing 211–240 of 445 results


DSE2130 | Input Expansion Module
$331.99Add to cart

DSE8003 MKII 7″ | Graphical Colour Multi-Set Remote Overview Display
$1,825.99Add to cart

DSE8620 | Synchronising & Load Sharing Control Module
$2,400.99Add to cart

Original | Mecc Alte AVR DSR | Digital Automatic Voltage Regulator | 4505005560
$399.50Add to cart

Mecc Alte | Ducati Energia 25µF Capacitor | P/N 416.30.98.80 | 9910303116
$16.30Add to cart

Mecc Alte | Ducati Energia 18µF Capacitor | P/N 416.30.96.80 | 9910303098
$12.50Add to cart

Mecc Alte | Ducati Energia 35µF Run Capacitor | P/N 416.17.57.EA | UL listed | 9910303133
$19.50Add to cart

Mecc Alte | Ducati Energia 35µF Run Capacitor | P/N 416.15.25.60 | 9910303131
$17.30Add to cart

Mecc Alte | Ducati Energia 35µF Capacitor | P/N 416.30.A1.80 | 9910303127
$16.70Add to cart

Mecc Alte | Ducati Energia 35µF Run Capacitor | P/N 416.17.57.LB | UL listed | 9910303126
$13.30Add to cart

Mecc Alte ECO 21 Ecologizer
$303.99Add to cart

DSEE050 | 3.5″ Engine Display
$518.99Add to cart

GCU-44 NEXYS Kit | Generator Control Unit
Read more
GCU-3000 for Tiered Engines
$1,242.90Add to cart
GCU-20 | Generator Control Unit
Read more
ECU-05-24v | Universal Add-on Auto-Start Control 24 volts
$251.65Add to cart
ECU-05-12v | Universal Add-on Auto-Start Control 12 volts
$251.65Add to cart
EB-9V | Automatic Flashing Unit for brush Type Generators
$189.03Add to cart
EA-230 | Replacement for Leroy Somers R230
$215.16Add to cart

FSU-12
$41.99Add to cart

FSU-10
$41.99Add to cart

FSU-8
$45.99Add to cart

LSU-12
$39.99Add to cart

LSU-8
$41.99Add to cart

MSP6724 Generic | Magnetic Pickup
$31.49Add to cart

AVR SX460 Pack x2 units | Generic Replacement
$34.99Add to cart

AVR SE350 Pack x2 units | Generic Replacement
$44.50Add to cart

Battery Heater Wrap 42 x 6 Inch | 60 – 80 °F with built-in thermostat
$235.99–$469.99Price range: $235.99 through $469.99Select options This product has multiple variants. The options may be chosen on the product page

Battery Heater Wrap 50 x 6 Inch | 60 – 80 °F with built-in thermostat
$243.99–$480.99Price range: $243.99 through $480.99Select options This product has multiple variants. The options may be chosen on the product page

EVR20-10191D11-N00 | Pump Circulation Heaters
$799.99Add to cart
Showing 211–240 of 445 results


DSE2130 | Input Expansion Module
- DIN rail & chassis mount.
- Power on/link lost LED.
- 1.2km (0.75 Mile) working range.
- Connect maximum of 4 x DSE2130’s to a single host controller.
- Rotary ID switch to select address of DSE2130 to talk with host module when multiple DSE2130 modules are in use.
- Max of 32 digital inputs – 16 can be configured for use as analogue.
PRODUCT VARIANTS 2130-00 – 2130 Input Expansion Module$331.99Add to cart

DSE8003 MKII 7″ | Graphical Colour Multi-Set Remote Overview Display
- Touch screen enabled.
- Remote communications (RS232, RS485 x2, Ethernet).
- Front panel mounting.
- Remote monitoring.
- Graphical displays showing, charts, meters, power display, graphs and engine status information.
- Up to 20 remote displays can be used within one system.


DSE8620 | Synchronising & Load Sharing Control Module
- Type 1 fully flexible inputs.
- Configurable inputs/outputs (12/8).
- Remote communications (RS232, RS485, Ethernet).
- Direct governor control.
- DSE Configuration Suite PC Software.
- Battery charger support across DSENet®.
- Configurable CAN transmit and receive.
- Can be configured for use as a DSE8610 MKII.


Original | Mecc Alte AVR DSR | Digital Automatic Voltage Regulator | 4505005560
For Mecc Alte ECO/ECP Series 3–38 Brushless Alternators, 50/60 Hz- Standard DSR (grey case) for Mecc Alte series 3–38. ECO40–46 alternators need the DSR/A instead.
- ±1% DIGITAL REGULATION: Holds voltage from no load to full load at any power factor. Recovers within ±3% in under 300 ms; start-up overshoot is under 5%.
- FLEXIBLE INPUTS: Supply 40–270 Vac from an auxiliary winding, the main output or a PMG. Sensing 70–140 or 140–280 Vac. Works from 12 to 72 Hz.
- FULL PROTECTION + ALARM LOG: Over/undervoltage, short circuit, overexcitation, underspeed, overspeed and loss of excitation. Keeps an alarm history and has an alarm output for a panel lamp or controller.
- PROGRAMMABLE: VOLT, STAB, AMP and Hz trimmers, a 50/60 Hz jumper, and remote voltage adjust. Full setup by PC through the USB2DxR module (sold separately).


Mecc Alte | Ducati Energia 25µF Capacitor | P/N 416.30.98.80 | 9910303116
Double FASTON, for Mecc Alte Generators, 550V AC, 2.5 kVAr, 50/60Hz, 55 x 132 mm, Metal Case
- Capacitance: 25 µF nominal (26.3 µF per catalog, -5/+10%), continuous duty
- Rated voltage: 550V AC, 2.5 kVAr, 4.5 A, 50/60 Hz
- Dimensions: 55 x 132 mm (D x H)
- Terminals: double FASTON 6.3 x 0.8 mm, IP00
- Case: metal case, self-extinguishing plastic lid (UL-94 V2), overpressure safety device
- Standard: IEC 831-1/2, expected life ≥ 80,000 h


Mecc Alte | Ducati Energia 18µF Capacitor | P/N 416.30.96.80 | 9910303098
Double FASTON, for Mecc Alte Generators, 550V AC, 1.67 kVAr, 50/60Hz, 45 x 132 mm, Metal Case
- Capacitance: 18 µF nominal (17.6 µF per catalog, -5/+10%), continuous duty
- Rated voltage: 550V AC, 1.67 kVAr, 3 A, 50/60 Hz
- Dimensions: 45 x 132 mm (D x H)
- Terminals: double FASTON 6.3 x 0.8 mm, IP00
- Case: metal case, self-extinguishing plastic lid (UL-94 V2), overpressure safety device
- Standard: IEC 831-1/2, expected life ≥ 80,000 h


Mecc Alte | Ducati Energia 35µF Run Capacitor | P/N 416.17.57.EA | UL listed | 9910303133
UL Recognized, 50x92 mm, Double FASTON, for Single-Phase Alternators, Fits Mecc Alte Generators
- Capacitance: 35 µF (±5%)
- Dimensions: 50 x 92 mm (D x H)
- Case: plastic, metallized polypropylene film, self-extinguishing UL-94 V2
- Voltage: 425V~ (30,000h, Class A) / 475V~ (10,000h, Class B), per EN 60252-1/A1
- Frequency: 50-60 Hz
- Terminals: FASTON 6.3 mm, double tag, no stud
- Safety class: S0
- Certifications: EN 60252-1/A1, VDE, IMQ, UL Recognized (File E192559, 370V~ / 450V~)


Mecc Alte | Ducati Energia 35µF Run Capacitor | P/N 416.15.25.60 | 9910303131
Double FASTON, for Single-Phase Alternators, Fits Mecc Alte Self-Excited Generators
- Capacitance: 35 µF (±5%)
- Dimensions: 50 x 117 mm (D x H)
- Case: plastic, metallized polypropylene film, self-extinguishing UL-94 V2
- Voltage: 425V~ (30,000h, Class A) / 475V~ (10,000h, Class B) / 500V~ (3,000h, Class C), per EN 60252-1/A1
- Frequency: 50-60 Hz
- Terminals: FASTON 6.3 mm, double tag, no stud
- Safety class: S0
- Certifications: EN 60252-1/A1, VDE, IMQ


Mecc Alte | Ducati Energia 35µF Capacitor | P/N 416.30.A1.80 | 9910303127
Ducati Energia 35µF Capacitor, P/N 416.30.A1.80, 550V AC, 3.3 kVAr, 50/60Hz, Double FASTON, Metal Case, Floppy Cap Series, for Mecc Alte Generators
- Capacitance: 35 µF (-5/+10%), continuous duty
- Rated voltage: 550V AC, 3.33 kVAr, 6.1 A, 50/60 Hz
- Dimensions: 60 x 137 mm (D x H)
- Terminals: double FASTON 6.3 x 0.8 mm, IP00
- Case: metal case, self-extinguishing plastic lid (UL-94 V2), overpressure safety device
- Standard: IEC 831-1/2, expected life ≥ 80,000 h


Mecc Alte | Ducati Energia 35µF Run Capacitor | P/N 416.17.57.LB | UL listed | 9910303126
For Single-Phase Alternators, 425-500V~, UL Recognized, Fits Mecc Alte & Other Self-Excited Generators
- Capacitance: 35 µF (±5%)
- Dimensions: 50 x 92 mm (D x H)
- Case: Plastic, metallized polypropylene film, self-extinguishing UL-94 V2
- Voltage: 425V~ (30,000h, Class A) / 475V~ (10,000h, Class B) / 500V~ (3,000h, Class C), per EN 60252-1/A1
- Frequency: 50-60 Hz
- Safety class: S0
- Certifications: EN 60252-1/A1, VDE, IMQ, UL Recognized (File E192559, 370V~ / 450V~)


Mecc Alte ECO 21 Ecologizer
Automatically idles the engine when there is no load, and returns to full speed the moment a load is applied. Saves fuel and cuts noise.
- Fits: Mecc Alte AP, AR1, MR1, MR2 alternators, 50/60 Hz (not ECO38–46)
- Auto idle: drops to about 60% speed at no load
- Delay: adjustable from 5 to 60 seconds
- Stable output: about 60 Vac per winding at idle
- 12V version: overvoltage protected; current probe and jumper included


DSEE050 | 3.5″ Engine Display
Fully configurable display colours Digital / analogue I/O mapping to icons 4 configurable multi-functional inputs (digital, current, voltage, resistance). IP67 rated front and rear Auto on / off heated display Customisable image display (30 screen support) PC configurable using DSE Configuration Suite Software$518.99Add to cart

GCU-44 NEXYS Kit | Generator Control Unit
GCU-44 control panel contains GCU-10 automatic engine control unit and DSP-10 Genset multi-function display module, which is specially designed to replace NEXYS controller. Simply connect the corresponding wire of the new harness of the GCU-44 to the original connector to easily complete the replacement. For detailed functions and settings of GCU-10 and DSP-10, refer to the contents of the user manual below.Read more
GCU-3000 for Tiered Engines
The main advantages of using the GCU-3000- Integrated design including an emergency stop button, AVR control, fuses, and positive outputs
- Large easy to see LCD screen
- Programmable start cycles
- Programmable idle speed timer
- Programmable cool down timer
- Maintenance notifications
- Engine block heater control
- Digital temperature sensor included
- High precision oil pressure sensor included
- Full monitoring and protection

GCU-20 | Generator Control Unit
GCU-20 Automatic Engine & Generator Control Unit has many useful functions like annunciator alarm output and selectable EM81/EM121 MPU signal for speed sensing. It’s suitable for pump engine control. GCU-20 also provide IDLE control for electronic governors.Read more
ECU-05-24v | Universal Add-on Auto-Start Control 24 volts
The ECU-04 and ECU-05 24 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.$251.65Add to cart
ECU-05-12v | Universal Add-on Auto-Start Control 12 volts
The ECU-04 and ECU-05 12 VDC, 100 VAC to 240 VAC Universal Add-on Auto-Start Control for all manual key start generator sets, simply changes any manual key start generator to auto-start type.$251.65Add to cart
EB-9V | Automatic Flashing Unit for brush Type Generators
McPherson Controls Automatic Flashing Unit for brush Type Generators The Safe and Easy Way to Automatically Flash any Stubborn Old Generators The EB-9V Automatic Flashing Module is a true electronic flashing circuit with a larching timeout circuit that can be set from 1 to 8 secons timer. This unit will not flash again as the generator is turned off. When true residual voltage is too low for the voltage regulator to build voltage normally on the generator the EB-9V is what you need.$189.03Add to cart
EA-230 | Replacement for Leroy Somers R230
McPherson Controls Self Excited Automatic Voltage Regulator Not a genuine Leroy Somer product.- Voltage Regulation < ±1%
- Economical Compact Design
- For use in 50/60 Hz Brushless Generators
- EMI Suppression
- Under Frequency Protection
- Over Excitation Current Shutdown
- 120 VAC Optional


FSU-12
• Sensing Unit for HOTSTART Models CB - CL - SB - SL - WL
• Temperature Range: ON: 120°F (49°C) – OFF 140°F (60°C) $41.99Add to cart

FSU-10
• Sensing Unit for HOTSTART Models CB - CL - SB - SL - WL
• Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
• The Delivery time for orders to Puerto Rico, Hawaii and foreign territories is 2 - 3 weeks. • Original - 1 Year warranty! $41.99Add to cart

FSU-8
• Sensing Unit for HOTSTART Models CB - CL - SB - SL - WL
• Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C) $45.99Add to cart

LSU-12
• Replacement Sensing Unit for HOTSTART TPS Models
• Temperature Range: ON: 120°F (49°C) – OFF 140°F (60°C) $39.99Add to cart

LSU-8
• Replacement Sensing Unit for HOTSTART TPS Models
• Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)$41.99Add to cart

MSP6724 Generic | Magnetic Pickup
3.4 in [86 mm] Thread Length • 5 in Lead Wires • Flange Mount- Thread: 3/4-16 UNF
- Connection: Lead wires (2)
- Measurement Accuracy: ±1%
- Produces electrical frequency
- Requires no energizing circuit from control
- Exact generic replacement for Datcon P/N 71256-00
- 1 Year Warranty


AVR SX460 Pack x2 units | Generic Replacement
- AVR SX460 pack of 2 units - Automatic Voltage Regulator - Exact Generic Replacement - 1 Year Warranty!
- INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
- OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
- Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
- Unit power dissipation: 10 watts maximum - Build up voltage:4 Volts @ AVR terminals


AVR SE350 Pack x2 units | Generic Replacement
- Sensing & Power Input: 190 - 240 Vac | Burden: 500 VA
- Output Power - Continuous: 73 Vdc at 3.5 Adc (255w) | Output Power - Forcing (240 Vac Input Power): 105 Vdc at 5 Adc (525w) | Regulation: 1.0%
- Remote Voltage adjustment Range: ±10% with 2000 ohm rheostat | ±5% with 1000 ohm rheostat
- Frequency Compensation: Adjustable Roll off frequency: 54 - 64 Hz for 60 Hz | 45 - 51 Hz for 50 Hz | Operation: Weight 6.5 oz
- Operating Temperature: -40°C to + 60°C | Storage Temperature: -60°C to + 85°C | Power Dissipation: 8 watts maximum


Battery Heater Wrap 42 x 6 Inch | 60 – 80 °F with built-in thermostat
Connector EC1100
- For use with MSP Military-Style (Amphenol) Sensor
- Mating Connector Kit
- Produces electrical frequency
- With Straight Cable Clamp and Weather Boot
- 2-Terminal
$235.99–$469.99Price range: $235.99 through $469.99Select options This product has multiple variants. The options may be chosen on the product page

Battery Heater Wrap 50 x 6 Inch | 60 – 80 °F with built-in thermostat
Connector EC1100
- For use with MSP Military-Style (Amphenol) Sensor
- Mating Connector Kit
- Produces electrical frequency
- With Straight Cable Clamp and Weather Boot
- 2-Terminal
$243.99–$480.99Price range: $243.99 through $480.99Select options This product has multiple variants. The options may be chosen on the product page

EVR20-10191D11-N00 | Pump Circulation Heaters
- Save Energy Cost by regulating the engine speed according to load requirements. GAC components are the best way of governing a generator where strict control of engine speed is desired irrespective of engine load
- ADC100 – 12 or 24 VDC / Packard Connector without Mating Connector / Includes GA102 | (Stanadyne D Series F.I. Pump / Packard Connector) | ADC100 series provides the function of a fuel shut-off solenoid.
- High Performance Fuel Control – Maintenance Free Operation – Actuator mounts directly to Stanadyne D Series Pump – No external linkages or brackets required – Faster response than competitive design
- GAC high performance speed control system are application based and consist of four major components: flywheel, magnetic speed pickup, speed controller and an actuator
- Application in: Military grade equipment, Rail, Marine, Industrial, Heavy Machinery, Gaseous Engines, Power Generation, Oil & Gas and much more… GAC is ISO 9001 certified | We carry the complete line of Governors America Corp products.
















































