Deals
Home 9 Deals
Showing 361–390 of 445 results
TPS052GT12-001 | Engine Heater
$279.99Add to cartGCU-100 | Generator Control Unit
$546.13Add to cartATS3PC150-22 | Automatic Transfer Switch, Controller and Enclosure / 3pole /150Amp
$1,336.97Add to cartATS3PC125-22 | Automatic Transfer Switch, Controller and Enclosure / 3pole /125Amp
$1,249.87Add to cartADVR-250 | Replacement Leroy Somers AVR R250
$283.10Add to cartFIMS5000 | (FIMS) Gas Engine
Read moreAccessories | MPS
$500.00Add to cartMSP6739 | Magnetic Pickup
$151.99Add to cartMSP6724 | Magnetic Pickup
$137.99Add to cartMSP6719 | Magnetic Pickup
$124.99Add to cartMSP6737 | Magnetic Pickup
$143.99Add to cartSSW Series | Speed Controls
Read moreESD5550/5570 Series | Speed Controls
$491.29–$564.59Price range: $491.29 through $564.59Select options This product has multiple variants. The options may be chosen on the product pageESD5330 | Speed Controls
$627.09Add to cartESD5100 Series | Speed Controls
Read moreESD2300 Series | Speed Controls
Read moreESD2200 Series | Speed Controls
Read moreESD1000 Series | Speed Controls
$270.49Add to cartESC Series | Speed Controls
Read moreECC Series | Speed Controls
Read moreMounting Brackets | Actuator
Read moreBearing Rod Ends | Actuator
Read moreThreaded Rod | Actuator
Read moreService Items | Actuator
Read moreInstallation Kits | Actuator
Read moreCable Harnesses | Actuator
Read moreADB335 Series | Actuator
Read moreACB120 Series | Actuator
$699.99Add to cartACE295 Series | Actuator
Read moreACB275C Series | Actuator
$1,156.69Add to cart
Showing 361–390 of 445 results
TPS052GT12-001 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 150 CID (2.5L)
- Volts: 240v – kW: 0.5 – AMPS: 2.1 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF: 120°F (49°C) Remote Thread-in Fixed Temperature Thermostat
GCU-100 | Generator Control Unit
- Micro-Processor Auto Control & Protection
- Three Sets of High Illuminating LED Display Suitable for Indoor and Outdoor Use
- Full Function Modularized Design for Easy Installation
- All Functions Setting Can Be Done Directly On GCU-100 No Need For PC Connection*
- All settings are recorded into the internal (EEPROM) and protected from erasure even without battery
- Easy to Understand Graphical Warning Signals
- Din Rail Terminal For Easy Installation
- IP65 Waterproof Front Panel
ATS3PC150-22 | Automatic Transfer Switch, Controller and Enclosure / 3pole /150Amp
- Manufactured using UL 94V-0 plastics.
- Electrically operated and mechanically held.
- Coil operating voltage: 110 / 220 Vac +/- 20%.
- Monitor Normal & Standby source OV and UV.
- Compact size, light weight and low power consumption.
- Adjustable time delay in OFF position when transferring.
- Designed for cell-phone repeaters, and many industrial and home ATS applications.
- Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
ATS3PC125-22 | Automatic Transfer Switch, Controller and Enclosure / 3pole /125Amp
- Manufactured using UL 94V-0 plastics.
- Electrically operated and mechanically held.
- Coil operating voltage: 110 / 220 Vac +/- 20%.
- Monitor Normal & Standby source OV and UV.
- Compact size, light weight and low power consumption.
- Adjustable time delay in OFF position when transferring.
- Designed for cell-phone repeaters, and many industrial and home ATS applications.
- Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
ADVR-250 | Replacement Leroy Somers AVR R250
Replaces Marathon DVR-2000 Series
Analog／Digital，Single-ph ase detection，Excitation Current 3.5 Amps. For use in brushl ess, self-excited (shunt) ge nerators Compatible with Leroy Somer* R250/R230, AVR
$283.10Add to cartFIMS5000 | (FIMS) Gas Engine
- Clean burn with closed-loop exhaust oxygen sensor control
- Low-pressure design, ideal for shale gas, biogas, landfill gas, and wellhead gas
- Reliable industrial-grade build, with potted controls and resistance to extreme vibration and temperature
- Economical: no need for a separate speed controller, fully integrated
- GAC-developed and controlled software, customizable with quick turnaround for updates
- Available in complete kits with venturi mixer, sensors, coils, spark plugs, and harnesses
Accessories | MPS
GAC’s Magnetic Speed Sensors are a rugged and economic solution for detecting engine speed. Sturdier than plastic sensors and outperforming semiconductor-type devices at high temperatures, GAC’s epoxy encapsulated sensors are unaffected by dust and dirt. Multiple sizes and customized configurations are available.
$500.00Add to cartMSP6739 | Magnetic Pickup
- Stainless steel construction
- Thread length: 3.13 in (79 mm) | Harness: 3 in (76 mm)
- Operating temperature: -65 ºF to +255 ºF (-54 ºC to +107 ºC)
- Available for hazardous location installation (not certified)
- Produces electrical frequency with no external energizing circuit required
- Compatible with all GAC electronic speed controllers
MSP6724 | Magnetic Pickup
- Gold anodized aluminum construction
- Thread length: 3.45 in (88 mm) | Harness: 3 in (76 mm)
- Automotive connector
- Operating temperature: -65 ºF to +255 ºF (-54 ºC to +107 ºC)
- Available for hazardous location installation (not certified)
- Compatible with all GAC electronic speed controllers
MSP6719 | Magnetic Pickup
2.37 in [60 mm] Thread Length • 1 ft [0.3 m] Harness • Flying Leads • Aluminum Clear Anodized- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
MSP6737 | Magnetic Pickup
- 3/8-24 UNF-2A thread | Length: 2.7 in (69 mm) | Harness: 6 in (152 mm)
- Push-on terminals
- Requires no energizing circuit from the controller
- Compatible with GAC and Woodward controllers
- Accurate, reliable speed signal across all RPM ranges
- Robust design for vibration-prone environments
SSW Series | Speed Controls
- One, two, or three switching elements (SSW674 / SSW675 / SSW676)
- 12 or 24 V DC operation
- 5 amp contacts
- Tachometer output and overspeed test function
- Reverse polarity protection
- Response time under 50 msec, with excellent repeatability
ESD5550/5570 Series | Speed Controls
- Multi-V DC, isochronous, variable, and droop operation
- Simple installation
- Starting Fuel and Speed Ramping adjustments
- Adjustable droop and idle operation, soft coupling, and lead circuit
- Auxiliary input and +10 V DC supply for accessories
- Protection against reverse voltage, transients, and short circuit, with fail-safe design
ESD5330 | Speed Controls
- 24 V DC, supports all GAC Actuators including the ACB2001
- Two-element speed switch
- Speed ramping idle to operating speed
- Starting fuel control for lower engine exhaust emissions
- Unique actuator power drive circuit
- Protection against reverse battery and transient voltage
ESD5100 Series | Speed Controls
- Isochronous, variable, and droop operation
- Adjustable PID functions
- Variable speed trim
- Switchable droop and idle control
- Auxiliary power supply
- 10 VDC supply for accessories
ESD2300 Series | Speed Controls
- Variable speed operation
- Adjustable PID functions
- Overspeed speed switch
- Foot pedal compatible
ESD2200 Series | Speed Controls
- Isochronous operation
- Adjustable PID functions
- Speed trim input
- Hard potted
ESD1000 Series | Speed Controls
- Isochronous operation
- Gain adjustment
- Hard potted
ESC Series | Speed Controls
- Wide voltage range: 12–32 VDC
- Isochronous or droop speed control
- Military-style connector (ESC61C) or terminal strip (ESC63C)
- Available with idle-run feature (ESC63C-23)
- Rugged, solid-state design for high reliability
ECC Series | Speed Controls
- No magnetic speed pickup needed
- Isochronous control based on generator voltage frequency
- Full PID setting
- Input signal range: 40 to 80 Hz
- Available in Light Force version (ECC328, 12 or 24 VDC)
Mounting Brackets | Actuator
Choose your Part Number Below:
- Each kit contains different items depending on the part number
- Detailed kit content description available upon request
Bearing Rod Ends | Actuator
Choose your Kit Part Number Below:
- Each kit contains different items
- Detailed descritption of kit content can be provided uppon request
Read moreThreaded Rod | Actuator
GAC’s Magnetic Speed Sensors are a rugged and economic solution for detecting engine speed. Sturdier than plastic sensors and outperforming semiconductor-type devices at high temperatures, GAC’s epoxy encapsulated sensors are unaffected by dust and dirt. Multiple sizes and customized configurations are available.
Read moreService Items | Actuator
Choose your Kit Part Number Below:
- Each kit contains different items
- Detailed descritption of kit content can be provided uppon request
Read moreInstallation Kits | Actuator
Choose your Kit Part Number Below:
- Each kit contains different items
- Detailed descritption of kit content can be provided uppon request
Read moreCable Harnesses | Actuator
VERTICAL MOUNT
50 mm x 129.6 mm x 138.5 mm 2.0” x 5.1” x 5.45”)
HORIZONTAL MOUNT
129.6 mm x 138.5 mm x 50 mm (5.1” x 5.45” x 2.0”)
WEIGHT
0.3kg
PRODUCT VARIANTS
BC2405-01 – 24 Volt 5 Amp Battery Charger
Read moreADB335 Series | Actuator
- Net torque: 3.3 lbf·ft (4.5 N·m)
- Rotation: 65°
- Power supply: 24 V DC
- Single-sided shaft
- Military-style connector included (ADB335-24)
ACB120 Series | Actuator
120 Series Universal Actuator | 12V or 24V DC • Commercial Connector with Mating Harness CH251-2134- Small, low-cost, low-friction model
- Internal spring provides fail-safe operation
- 1.0 lbf·ft [1.35 N·m] of torque
- Suitable for rotary or small in-line fuel pumps on small carburetors
- Ideal for fuel systems on engines up to 150 hp [112 kW]
ACE295 Series | Actuator
- 24 V DC, direct mount to Bosch 'P' pumps
- Dual isolated chamber design, prevents jamming from magnetic particles
- Manual shut-off lever
- Controls pumps on engines up to 12 cylinders
- Packard connector, no external linkages or brackets required
ACB275C Series | Actuator
Multi-V DC • Standard Unit- Adjustable PID
- Idle speed adjustment
- Auxiliary accessory input
- Temperature-compensated available
- Soft coupling options available
- EFC reverse acting options available
- EFC forward acting
- Light-force option available
