Best Sellers

Showing all 17 results

• 

  AVR SX460 | Generic Replacement

  • SX460 AVR - Automatic Voltage Regulator - Exact Generic Replacement - 1 Year Warranty!
  • INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
  • OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
  • Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
  • Unit power dissipation: 10 watts maximum - Build up voltage：4 Volts @ AVR terminals
  $20.70
  AVR SX460 | Generic Replacement quantity
  Add to cart
• 

  AVR SE350 | Generic Replacement

  • SE350 AVR - Automatic Voltage Regulator - Exact Generic Replacement Sensing & Power Input: 190 - 240 Vac Burden: 500 VA
  • Output Power - Continuous: 73 Vdc at 3.5 Adc (255w) | Output Power - Forcing (240 Vac Input Power): 105 Vdc at 5 Adc (525w) | Regulation: 1.0%
  • Remote Voltage adjustment Range: ±10% with 2000 ohm rheostat | ±5% with 1000 ohm rheostat
  • Frequency Compensation: Adjustable Roll off frequency: 54 - 64 Hz for 60 Hz | 45 - 51 Hz for 50 Hz | Operation: Weight 6.5 oz
  • Operating Temperature: -40°C to + 60°C | Storage Temperature: -60°C to + 85°C | Power Dissipation: 8 watts maximum
  $28.50
  AVR SE350 | Generic Replacement quantity
  Add to cart
• 

  AVR SX460 Pack x2 units | Generic Replacement

  • AVR SX460 pack of 2 units - Automatic Voltage Regulator - Exact Generic Replacement - 1 Year Warranty!
  • INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
  • OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
  • Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
  • Unit power dissipation: 10 watts maximum - Build up voltage：4 Volts @ AVR terminals
  $34.99
  AVR SX460 Pack x2 units | Generic Replacement quantity
  Add to cart
• 

  AVR SE350 Pack x2 units | Generic Replacement

  • Sensing & Power Input: 190 - 240 Vac | Burden: 500 VA
  • Output Power - Continuous: 73 Vdc at 3.5 Adc (255w) | Output Power - Forcing (240 Vac Input Power): 105 Vdc at 5 Adc (525w) | Regulation: 1.0%
  • Remote Voltage adjustment Range: ±10% with 2000 ohm rheostat | ±5% with 1000 ohm rheostat
  • Frequency Compensation: Adjustable Roll off frequency: 54 - 64 Hz for 60 Hz | 45 - 51 Hz for 50 Hz | Operation: Weight 6.5 oz
  • Operating Temperature: -40°C to + 60°C | Storage Temperature: -60°C to + 85°C | Power Dissipation: 8 watts maximum
  $44.50
  AVR SE350 Pack x2 units | Generic Replacement quantity
  Add to cart
• 

  TPS101GT10-000 | Engine Heater

  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
  • Engine Displacement: 350 CID (5.7 L)
  • Volts: 120v – kW: 1 – AMPS: 8.4 – 60Hz
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   $139.99
  TPS101GT10-000 | Engine Heater quantity
  Add to cart
• 

  TPS151GT10-000 | Engine Heater

  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
  • Engine Displacement: 350 – 500 CID (5.7 – 8.2 L)
  • Volts: 120V – kW: 1.5 – Amps: 12.5 – 60Hz
  • Temperature Range: ON: 100°F (38°C) – OFF: 120°F (49°C)
  $139.99
  TPS151GT10-000 | Engine Heater quantity
  Add to cart
• 

  MSP6720 | Magnetic Pickup

  3.86 in [98 mm] Thread Length • 1 ft [0.3 m] Harness • Flying Leads • Aluminum Clear Anodized

  • -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
  • Available for hazardous location installation (not certified)
  • Produces electrical frequency
  • Requires no energizing circuit from control
  • Used on all GAC’s electronic speed controllers

   

  $147.99
  MSP6720 | Magnetic Pickup quantity
  Add to cart
• 

  EEG6500 | Digital Speed Control

  • Identical mounting hole pattern to ESD5500E
  • Improved LCD interface, fast setup with 5 push buttons, no potentiometers
  • Lockable display to prevent unauthorized access
  • 2 fixed speeds (rated/idle) plus variable speed
  • Selectable isochronous or droop governing
  • Built-in fault readout and SAE J1939 engine data
   $405.49
  EEG6500 | Digital Speed Control quantity
  Add to cart
• 

  CB125110-200 | Engine Heater

  • HOTSTART CB125110-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
  • Replacement to CB1251A3-200
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
  • Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
  • Volts: 120v – kW: 2.5 – AMPS: 20.8 – 60Hz -Single Phase
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   $409.99
  CB125110-200 | Engine Heater quantity
  Add to cart
• 

  CB125210-200 | Engine Heater

  • HOTSTART CB125210-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
  • Replacement to CB1252A3-200
  • Pre-heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
  • Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
  • Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   $409.99
  CB125210-200 | Engine Heater quantity
  Add to cart
• 

  ALN025 | Actuator

  • Low Cost, Compact Design
  • Fast Response
  • Precise Repeatability
  • Provide a quick response time and can be used for many different applications
  • Completely self-contained
  • Integral return spring returns output shaft to zero fuel position if battery power is lost
  • Operate in any position, are not gravity sensitive
  • Compatible with GAC’s standard speed control units
  • Maintenance Free
  • Requires only a firm mounting surface, appropriate linkage to the fuel control and electrical connection to the speed control unit
   $419.99
  ALN025 | Actuator quantity
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  ESD5500E Series | Speed Controls

  Multi-V DC • Standard Unit
  • Switchable droop control
  • Adjustable PID
  • Idle speed adjustment
  • Auxiliary accessory inputs
  • Speed ramping
  • Soft coupling
  $432.99
  ESD5500E Series | Speed Controls quantity
  Add to cart
• 

  ADC100 | Actuator

  • High-performance fuel control
  • Maintenance-free operation
  • Mounts directly to Stanadyne D Series Pump
  • No external linkages or brackets required
  • Faster response than competitive designs
  • Integrated fuel shut-off solenoid function
   $433.39
  ADC100 | Actuator quantity
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  DSE890 | DSEWebNet® Gateway – 4G (GSM)/Ethernet

  • The DSE890 MKII is an Ethernet/4G gateway device that enables compatible DSE controllers to be monitored remotely via DSEWebNet® software or third-party MQTT brokers.
  • Combined 4G LTE (Main & Diversity) / GPS Antenna
  • 4G/3G/GPS Connectivity.
  • Flexible installation options.
  • Works across multiple frequencies.
  • Can be installed in multiple application environments.
  • Configure device to be monitored using DSEWebNet® software.
  • Multiple users can access each DSE890 simultaneously.
  • Main & diversity aerial connection inputs.
  PRODUCT VARIANTS 0890-01 – 890 DSEWebnet Gateway – 3G GSM/Ethernet  $615.99
  DSE890 | DSEWebNet® Gateway - 4G (GSM)/Ethernet quantity
  Add to cart
• 

  DSE7320 MKII | Auto Mains Failure Control Module

  • DSENet® Expansion Support
  • PC configuration using DSE Configuration Suite
  • Multiple language support
  • Enhanced 4-line text display
  • Multi-level pin protected front panel editor
  • Automatic start and stopping of generator and transfer of load based on mains (utility) availability
  PRODUCT VARIANTS 7320-03 – 7320 MKII Auto Mains (Utility) Failure Control Module$689.99
  DSE7320 MKII | Auto Mains Failure Control Module quantity
  Add to cart
• 

  2 pole | 125 Amps | Automatic Transfer | ATS2PC125-22

  • Manufactured using UL 94V-0 plastics.
  • Electrically operated and mechanically held.
  • Coil operating voltage: 110 / 220 Vac +/- 20%.
  • Monitor Normal & Standby source OV and UV.
  • Compact size, light weight and low power consumption.
  • Adjustable time delay in OFF position when transferring.
  • Designed for cell-phone repeaters, and many industrial and home ATS applications.
  • Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
   $1,075.68
  2 pole | 125 Amps | Automatic Transfer | ATS2PC125-22 quantity
  Add to cart
• 

  PMI TCS4P125-22 Manual Transfer Switch

  • Manufactured using UL 94V-0 plastics.
  • Electrically operated and mechanically held.
  • Coil operating voltage: 110 / 220 Vac +/- 20%.
  • Monitor Normal & Standby source OV and UV.
  • Compact size, light weight and low power consumption.
  • Adjustable time delay in OFF position when transferring.
  • Designed for cell-phone repeaters, and many industrial and home ATS applications.
  • Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
   $1,141.87
  PMI TCS4P125-22 Manual Transfer Switch quantity
  Add to cart