Deals
Home 9 Deals
Showing 1–30 of 434 results
AVR SE350 | Generic Replacement
$28.50Add to cartAVR MX341 | Generic Replacement
$56.59Add to cartAVR SX460 | Generic Replacement
$20.70Add to cartTPS151GT10-000 | Engine Heater
$139.99Add to cartAVR R438 | Generic Replacement
$66.50Add to cartTPS101GT10-000 | Engine Heater
$139.99Add to cartADC100 | Actuator
$433.39Select options This product has multiple variants. The options may be chosen on the product pageTPS151GT12-001 | Engine Heater
$149.99Add to cartTPS151GT8-000 | Engine Heater
$139.99Add to cartTC-V2 Controller Only
$310.88Add to cartCB125110-200 | Engine Heater
$409.99Add to cartCTM15110-N00 | HOTflow
$779.99Add to cartCB125210-200 | Engine Heater
$409.99Add to cartDSE890 | DSEWebNet® Gateway – 4G (GSM)/Ethernet
$615.99Add to cartDSE7320 MKII | Auto Mains Failure Control Module
$689.99Add to cartAVR SR7-2G (SR-7) | Generic Replacement
$56.59Add to cartEEG6500 | Digital Speed Control
$405.49Add to cartTPS181GT12-001 | Engine Heater
$194.99Add to cartTPS202GT10-000 | Engine Heater
$149.99Add to cartDSE 9470 Battery Charger Original
$327.99Add to cartDSE7310 MKII | Auto Start Control Module
$896.99Add to cartAVR MX321 | Generic Replacement
$102.49Add to cartCB115110-200 | Engine Heater
$409.99Add to cart4G LTE 020-1053 | (Main & Diversity) / GPS Antenna
$141.00Add to cartTPS181GT10-000 | Engine Heater
$149.99Add to cartAVR AS440 | Generic for Cummins
$31.00Add to cartDSE890 + GPS Antenna
$731.05Add to cartTPS181GT12-000 | Engine Heater
$149.99Add to cartTPS101GT8-000 | Engine Heater
$139.99Add to cartDSE855 | USB to Ethernet Communications Device
$163.01Add to cart
Showing 1–30 of 434 results
AVR SE350 | Generic Replacement
- SE350 AVR - Automatic Voltage Regulator - Exact Generic Replacement Sensing & Power Input: 190 - 240 Vac Burden: 500 VA
- Output Power - Continuous: 73 Vdc at 3.5 Adc (255w) | Output Power - Forcing (240 Vac Input Power): 105 Vdc at 5 Adc (525w) | Regulation: 1.0%
- Remote Voltage adjustment Range: ±10% with 2000 ohm rheostat | ±5% with 1000 ohm rheostat
- Frequency Compensation: Adjustable Roll off frequency: 54 - 64 Hz for 60 Hz | 45 - 51 Hz for 50 Hz | Operation: Weight 6.5 oz
- Operating Temperature: -40°C to + 60°C | Storage Temperature: -60°C to + 85°C | Power Dissipation: 8 watts maximum
AVR MX341 | Generic Replacement
- SENSING INPUT Voltage 190-264V ac max, 1 phase 2 wire Frequency 50-60HZ nominal
- POWER INPUT Voltage 140-220 V ac max, 3 phase,3 wire CURRENT: 3A/phase Frequency 100-120HZ nominal
- OUTPUT Voltage max 120V dc Current continuous 2.7A dc
- Automatic Voltage Regulator AVR
- Exact Generic Replacement - 1 Year Warranty!
AVR SX460 | Generic Replacement
- SX460 AVR - Automatic Voltage Regulator - Exact Generic Replacement - 1 Year Warranty!
- INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
- OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
- Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
- Unit power dissipation: 10 watts maximum - Build up voltage：4 Volts @ AVR terminals
TPS151GT10-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2 L)
- Volts: 120V – kW: 1.5 – Amps: 12.5 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF: 120°F (49°C)
AVR R438 | Generic Replacement
Fuse: F1on X1,X2.10A;slow-250V- Voltage regulation ±0.5%
- Short circuit capability: 3 x Irated for 10 seconds ( AREP or PMG excitation)
- Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
- Response time: Normal (1sec) for _+20% voltage variation or rapid (0.3 sec) for ∼+20% voltage variation.
- Remote voltage adjustment range of: _+5% *1000 Series alternators do not have PMG option. 1 Year Warranty!
TPS101GT10-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 CID (5.7 L)
- Volts: 120v – kW: 1 – AMPS: 8.4 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
ADC100 | Actuator
- High-performance fuel control
- Maintenance-free operation
- Mounts directly to Stanadyne D Series Pump
- No external linkages or brackets required
- Faster response than competitive designs
- Integrated fuel shut-off solenoid function
TPS151GT12-001 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2 L)
- Volts: 120v – kW: 1.5 – AMPS: 12.5 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF: 120°F (49°C) Remote Thread-in Fixed Temperature Thermostat
TPS151GT8-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2 L)
- Volts: 120v – kW: 1.5 – AMPS: 12.5 – 60Hz
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
TC-V2 Controller Only
- The TC-V2 digital control unit offers programming exibility to customize the ATS to dierent customer requirements
- Monitor normal source for full phase over and under voltages
- Monitor emergency source for single phase over and under voltages
- Normal & emergency source voltage and frequency parameter display
- TDEN, TDNE, TDEC and TDOFF real time countdown display
- Made in USA!
CB125110-200 | Engine Heater
- HOTSTART CB125110-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1251A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 120v – kW: 2.5 – AMPS: 20.8 – 60Hz -Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
CTM15110-N00 | HOTflow
- Part Number: CTM15110-N00 – 1500W – 120V – 100/120F – Coolant Systems
- Heating Fluid: Engine coolant (50% glycol/50% water)
- Heat Power: 1, 1.5, and 2.5 kW – Fixed Thermostat: 100°-120°F (38°-49°C)
- Flow: 3.5GPM (0.79 m3/hr) @ 3 PSI (21 kPa)
- UL/C-US listed models available – Compact design – Easy to install
$779.99Add to cartCB125210-200 | Engine Heater
- HOTSTART CB125210-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1252A3-200
- Pre-heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
DSE890 | DSEWebNet® Gateway – 4G (GSM)/Ethernet
- The DSE890 MKII is an Ethernet/4G gateway device that enables compatible DSE controllers to be monitored remotely via DSEWebNet® software or third-party MQTT brokers.
- Combined 4G LTE (Main & Diversity) / GPS Antenna
- 4G/3G/GPS Connectivity.
- Flexible installation options.
- Works across multiple frequencies.
- Can be installed in multiple application environments.
- Configure device to be monitored using DSEWebNet® software.
- Multiple users can access each DSE890 simultaneously.
- Main & diversity aerial connection inputs.
DSE7320 MKII | Auto Mains Failure Control Module
- DSENet® Expansion Support
- PC configuration using DSE Configuration Suite
- Multiple language support
- Enhanced 4-line text display
- Multi-level pin protected front panel editor
- Automatic start and stopping of generator and transfer of load based on mains (utility) availability
AVR SR7-2G (SR-7) | Generic Replacement
- EXACT GENERIC REPLACEMENT
- Sensing Input: Terminal 1,2 3,4 5,6 Can be connected to Y or 220~480VAC Single Phase 50/60HZ.
- Power Input: 50~280VAC (1,2) 50/60HZ.
- Output Voltage: Maximum 90VDC @ 220VAC Harmonic Wave.
- Output Current: Continuous 6A Maximum 8A for 10 sec.
EEG6500 | Digital Speed Control
$405.49Add to cart- Identical mounting hole pattern to ESD5500E
- Improved LCD interface, fast setup with 5 push buttons, no potentiometers
- Lockable display to prevent unauthorized access
- 2 fixed speeds (rated/idle) plus variable speed
- Selectable isochronous or droop governing
- Built-in fault readout and SAE J1939 engine data
TPS181GT12-001 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 700 CID (8.2 – 11.5L)
- Volts: 120v – kW: 1.8 – AMPS: 15 – 60Hz
- Temperature Range: Remote thread-in fixed temperature thermostat | comes with Nema 5-20 rated plug (20A receptacle or adaptor required)
TPS202GT10-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 700CID (8.2 – 11.5L)
- Volts: 240v – kW: 2 – AMPS: 8.3 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C) comes with Nema 5-20 rated plug (20A receptacle or adaptor required)
DSE 9470 Battery Charger Original
- Integrated DSENet® / RS485 port providing ability to be connected to a DSEGenset module as an expansion module, or Modbus RTU support.
- Periodic automatic battery detection test with configurable timers
- PC configuration using DSE Configuration Suite
- Deep sleep mode allowing the charger to enter a low power consumption state
- Soft start reduces inrush current when initiating the charging process
DSE7310 MKII | Auto Start Control Module
- DSENet® Expansion Support
- PC configuration using DSE Configuration Suite
- Multiple language support
- Latest ECU / ECM support for a wide range of engine manufacturers
- Manual starting / control by fascia button and automatic starting / control by inputs and other functions
AVR MX321 | Generic Replacement
- Voltage: 190 - 264V ac max, 2 or 3 phase. Frequency: 50 - 60 HZ nominal
- POWER INPUT: (PMG) Voltage: 170-220V ac max, 3 phase, 3 wire. Current: 3A/phase. Frequency: 100 - 120 Hz nominal
- OUTPUT: Voltage: max 120V dc Current: continuous 3.7 A. Intermittent 6A for 10 secs. Resistance: 15 ohms minimum
- REGULATION +/- 0.5% RMS with 4% engine governing
- THERMAL DRIFT 0.02% per deg. C chance in AVR ambient. SOFT START RAMP TIME 0.4 - 4 seconds
CB115110-200 | Engine Heater
- HOTSTART CB115110-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1151A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2L)
- Volts: 120v – kW: 1.5 – AMPS: 12.5 – 60Hz – Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
4G LTE 020-1053 | (Main & Diversity) / GPS Antenna
OVERALL DIAMETER 77.3 mm (3.04″) HOUSING DEPTH 65.5 mm (2.58″) WEIGHT 0.3kg PRODUCT VARIANTS 0890-04 – 890 MKII DSEWebnet® Gateway – 4G LTE / GPS Antenna$141.00Add to cartTPS181GT10-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 700 CID (8.2 – 11.5L)
- Volts: 120v – kW: 1.8 – AMPS: 15 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C) comes with Nema 5-20 rated plug (20A receptacle or adaptor required)
AVR AS440 | Generic for Cummins
Features include:- Stability adjustment
- Optimum response selection
- Under frequency roll off adjustment
- Droop adjustment
- Trim adjustment
DSE890 + GPS Antenna
- Remote communications Kit
- The DSE890 MKII is an Ethernet/4G gateway device that enables compatible DSE controllers to be monitored remotely via DSEWebNet® software or third-party MQTT brokers.
- Combined 4G LTE (Main & Diversity) / GPS Antenna
- 4G/3G/GPS Connectivity.
- Flexible installation options.
- Works across multiple frequencies.
- Can be installed in multiple application environments.
- Configure device to be monitored using DSEWebNet® software.
- Multiple users can access each DSE890 simultaneously.
- Main & diversity aerial connection inputs.
TPS181GT12-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 700 CID (8.2 – 11.5L)
- Volts: 120v – kW: 1.8 – AMPS: 15 – 60Hz
- Temperature Range: ON: 120°F (49°C) – OFF: 140°F (60°C) Remote thread-in fixed temperature thermostat | comes with Nema 5-20 rated plug (20A receptacle or adaptor required)
TPS101GT8-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 CID (5.7 L)
- Volts: 120v – kW: 1 – AMPS: 8.4 – 60Hz
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
DSE855 | USB to Ethernet Communications Device
PRODUCT VARIANTS 0855-01 – 855 USB to Ethernet Communications Device$163.01Add to cart- Converts a USB port to an Ethernet port.
- In-built web server.
- Simple Internet browser configuration.
- Remote control & monitoring for all connected modules.
- Firmware upgradeable.
