Deals
Home 9 Deals
Showing 121–150 of 434 results
KIT-TPS051GT10-000 | Engine Heater
$191.99Add to cartKIT-TPS151GT12-001 | Engine Heater
$199.99Add to cartTPS181GT12-A00 | Engine Heater
$359.99Add to cartADVR-16 | Hybrid Analog Digital Voltage Regulator
$405.00Add to cartADVR-073 | Hybrid Analog Digital Voltage Regulator
$215.16Add to cartESD5500E Series | Speed Controls
$432.99Add to cartESD2110 | Speed Controls
$377.09Add to cartCL150212-200 | Engine Heater
$689.99Add to cartCL140808-200 | Engine Heater
$689.99Add to cartCB120810-200 | Engine Heater
$539.90Add to cartCB120100-000 | Engine Heater
$336.16Add to cartTPS151GT12-000 | Engine Heater
$139.99Add to cartTPS052GT8-000 | Engine Heater
$151.99Add to cartDSEA106 MKII | Digital Automatic Voltage Regulator (AVR)
$437.99Add to cartDSE9150-00 Battery Charger
$108.99Add to cartAVR AVC63-7 | Generic Replacement
$137.49Add to cartAVR R450 | Generic Replacement
$156.50Add to cartDSE BC1205-01 Battery Charger
$143.99Add to cartMSP6730 | Magnetic Pickup
$170.50Add to cartEE120110-000 | EE Engine Heater
$1,929.99Add to cartMSP6724C | Magnetic Pickup
$147.99Add to cartKIT-TPS052GT8-000 | Engine Heater
$191.39Add to cartECC328 | Speed Control
$275.49Select options This product has multiple variants. The options may be chosen on the product pageWL325410-200 | Engine Heater
$827.99Add to cartCB125100-000 | Engine Heater
$336.16Add to cartSB120100-000 | Engine Heater
$369.99Add to cartSB115108-200 | Engine Heater
$579.99Add to cartAutomatic Transfer Switch and Controller / 4Pole /125Amp | TCS4P125-22
$1,141.87Add to cartOil Pressure Gauge
$18.60–$22.49Price range: $18.60 through $22.49Select options This product has multiple variants. The options may be chosen on the product pageTPS051GT12-A00 | Engine Heater
$334.99Add to cart
Showing 121–150 of 434 results
KIT-TPS051GT10-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 150 CID (2.5L)
- Volts: 120v – kW: 0.5 – AMPS: 4.2 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
KIT-TPS151GT12-001 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2 L)
- Volts: 120v – kW: 1.5 – AMPS: 12.5 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF: 120°F (49°C) Remote Thread-in Fixed Temperature Thermostat
TPS181GT12-A00 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2L)
- Volts: 240v – kW: 1.5 – AMPS: 6.3 – 60Hz
- Temperature Range: ON: 90°F (2x°C) – OFF 130°F (6x°C) – ADJUSTABLE
$359.99Add to cartADVR-16 | Hybrid Analog Digital Voltage Regulator
Replaces Marathon DVR-2000 Series
Analog／Digital，Single-ph ase detection，Excitation Current 3.5 Amps. For use in brushl ess, self-excited (shunt) ge nerators Compatible with Leroy Somer* R250/R230, AVR
$405.00Add to cartADVR-073 | Hybrid Analog Digital Voltage Regulator
Replaces Marathon DVR-2000 Series
Analog／Digital，Single-ph ase detection，Excitation Current 3.5 Amps. For use in brushl ess, self-excited (shunt) ge nerators Compatible with Leroy Somer* R250/R230, AVR
$215.16Add to cartESD5500E Series | Speed Controls
Multi-V DC • Standard Unit- Switchable droop control
- Adjustable PID
- Idle speed adjustment
- Auxiliary accessory inputs
- Speed ramping
- Soft coupling
ESD2110 | Speed Controls
- Isochronous operation
- Adjustable PID functions
- Frequency trim input
- Sheet metal case
CL150212-200 | Engine Heater
- HOTSTART CL150208-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 1350 – 1650 CID (22.1 – 27.0L)
- Volts: 240v – kW: 5.0 – AMPS: 20.8 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
CL140808-200 | Engine Heater
- HOTSTART CL140808-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 1000 – 1350 CID (16.4 – 22.1L)
- Volts: 208v – kW: 4.0 – AMPS: 19.2 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
CB120810-200 | Engine Heater
- HOTSTART CB120810-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1208A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 600 CID (8.2 – 9.8L)
- Volts: 208v – kW: 2.0 – AMPS: 9.6 – 60Hz -Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
CB120100-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 600 CID (8.2 – 9.8L)
- Volts: 120v – kW: 2.0 – AMPS: 16.7 – 60Hz – Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
TPS151GT12-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2 L)
- Volts: 120v – kW: 1.5 – AMPS: 12.5 – 60Hz
- Temperature Range: ON: 120°F (49°C) – OFF 140°F (60°C)
TPS052GT8-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 150 CID (2.5L)
- Volts: 240v – kW: 0.5 – AMPS: 2.1 – 60Hz
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
DSEA106 MKII | Digital Automatic Voltage Regulator (AVR)
- Soft start ramping.
- Under frequency roll off protection with optional instantaneous step.
- Remote voltage adjustment using -10 V to 10 V signal and 5kΩ potentiometer.
- Remote voltage adjustment potentiometer open circuit protection.
- LED Indication for fault and operating status.
- DIP Switch selection.
DSE9150-00 Battery Charger
- Constant current/constant voltage.
- Automatic float mode return.
- Reverse polarity, short-circuit and current limiting protection.
- Auto recovery on fault condition removal.
- Cell charge boost and equalizing.
- Chargers can be linked together.
- Dedicated boost connection terminals.
AVR AVC63-7 | Generic Replacement
- < ± 1.5% Regulation
- Soft Start Voltage Ramping – Sensing Voltage Loss Protection
- 120 or 240 VAC Sensing, Jumper Selectable Under Frequency Roll Off Protection
- With Under Frequency LED Indicator
AVR R450 | Generic Replacement
- The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers. Exact Generic Replacement for R450 | 1 Year Warranty!
- Maximum power supply: 150v 50/60 Hz. Rated overload current: 10 A - 10 s
- Electronic protection: In case of a short-circuit, the excitation current is reduced to a value less than 1A after 10 s.
- In the event of loss of voltage reference, the excitation, the current is reduced as indicated in the next diagram. 0-110V terminals = 95 to 140 V | 0-220V terminals = 170 to 260 V | 0-380V terminals = 340 to 528 V
- For other voltages, a transformer should be used. Voltage regulation: ± 0.5%
DSE BC1205-01 Battery Charger
- Adjustable charging voltages provides compatibility for a wide range of different battery chemistries.
- Manual boost function to help maintain battery condition.
- Switched-mode power supply technology to provide high operating efficiency with low charge output ripple and superb line regulation.
- Status indication provided by LED.
MSP6730 | Magnetic Pickup
3/8 x 24 UNF-2A Threaded Magnetic Speed Pickup MSP6730
- 1.7 in [43 mm] Thread Length
- 6 ft [1.8 m] Shielded Cable
- Flying Leads
- Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
$170.50Add to cartEE120110-000 | EE Engine Heater
- EE Engine Heater – Weather-Tight Coolant preheater
- Heating Fluid: Engine Coolant, Water, other
- No pump needed (thermosiphon principle)
- Volts: 208v
- kW: 2.5 | One-Phase | 12.5 Amps
- Engine Displacement: 1350 – 1650 CID | 22.1 – 27.0L E
- Primary Temperature Control: 100–120 °F (38–49 °C)
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
MSP6724C | Magnetic Pickup
3.45 in [88 mm] Thread Length • 3 in [76 mm] Harness • Automotive Connector • Same as MSP6724 with Mating Harness CH1206 • Aluminum Gold Anodized
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
$147.99Add to cartKIT-TPS052GT8-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 150 CID (2.5L)
- Volts: 240v – kW: 0.5 – AMPS: 2.1 – 60Hz
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
ECC328 | Speed Control
The speed signal input must be in the frequency range of 40 to 80 Hz. Other features include:
- 12 V or 24 V DC Light-Force (Low-Current Optimized PID)
- Isochronous operation
- No magnetic speed pick-up required
- For Genset only – 260 V AC MAX
- Rugged hard potted design
- Gain and stability adjustments
- Lower system cost
- The ECC328 is compatible with GAC ALN, ALR, 100, and 103 Series actuators.
$275.49Select options This product has multiple variants. The options may be chosen on the product pageWL325410-200 | Engine Heater
- WL Engine Heater – Weather-Tight Coolant preheater
- Heating Fluid: Engine Coolant, Water, other
- No pump needed (thermosiphon principle)
- Volts: 240v – 208v – 240v – 400v – 480v – 575v
- kW: 2.5 – 4 – 5 | 60Hz – Three Phase
- Primary Temperature Control: 100–120 °F (38–49 °C)
- Primary High Limit Temperature: 205°F (96°C)
- UL-C / US listed | CE-compliant models available
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
CB125100-000 | Engine Heater
- HOTSTART CB125208-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
SB120100-000 | Engine Heater
- SB Engine Heater – Weather-Tight Coolant preheater
- Heating Fluid: Engine Coolant, Water, other
- No pump needed (thermosiphon principle)
- Volts: 120v – 208v – 240v – 277v
- kW: 1.5 – 2 – 2.25 – 2.5 | 60Hz – AC – Single-Phase
- Primary Temperature Control: 100–120 °F (38–49 °C)
- Primary High Limit Temperature: 205°F (96°C)
- UL-C / US listed | CE-compliant models available
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
SB115108-200 | Engine Heater
- SB Engine Heater – Weather-Tight Coolant preheater
- Heating Fluid: Engine Coolant, Water, other
- No pump needed (thermosiphon principle)
- Volts: 120v – 208v – 240v – 277v
- kW: 1.5 – 2 – 2.25 – 2.5 | 60Hz – AC – Single-Phase
- Primary Temperature Control: 100–120 °F (38–49 °C)
- Primary High Limit Temperature: 205°F (96°C)
- UL-C / US listed | CE-compliant models available
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
Automatic Transfer Switch and Controller / 4Pole /125Amp | TCS4P125-22
- Manufactured using UL 94V-0 plastics.
- Electrically operated and mechanically held.
- Coil operating voltage: 110 / 220 Vac +/- 20%.
- Monitor Normal & Standby source OV and UV.
- Compact size, light weight and low power consumption.
- Adjustable time delay in OFF position when transferring.
- Designed for cell-phone repeaters, and many industrial and home ATS applications.
- Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
Oil Pressure Gauge
- Individual Pressure Senders
- Range: 0-150 PSI
- Thread: 1/8″-27 NPT
- Number on Contact: 30/15
- Warning Contact: 11.4 PSI
$18.60–$22.49Price range: $18.60 through $22.49Select options This product has multiple variants. The options may be chosen on the product pageTPS051GT12-A00 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 700 CID (8.2 – 11.5L)
- Volts: 240v – kW: 2 – AMPS: 8.3 – 60Hz
- Temperature Range: ON: 90°F (2x°C) – OFF 130°F (6x°C) – ADJUSTABLE
$334.99Add to cart
