-
Remote Communications & Overview Displays
Original DSE892-01 | Simple Network Management Protocol (SNMP) Gateway
Remote Communications & Overview DisplaysOriginal DSE892-01 | Simple Network Management Protocol (SNMP) Gateway
OVERALL SIZE
85 mm x 149 mm x 51 mm (3.3” x 5.8” x 2.0”)
WEIGHT
0.24kg
PRODUCT VARIANTS
0892-01 – 892 Simple Management Network Protocol (SMNP) GatewayCall for Quote for international purchases!
SKU: DSE892-01 -
ATS Control Modules
Original DSE160 | Self-Seeking Power Supply
OVERALL
136 mm x 140 mm x 63 mm (5.4” x 5.5” x 2.5”)
WEIGHT
0.4kg
PRODUCT VARIANTS
0160-00 – 12 Volt Self Seeking Power Supply (110v-277v 50.60Hz)
0160-01 – 24 Volt Self Seeking Power Supply (110v-277v 50/60Hz)Call for Quote for international purchases!
SKU: DSE160 -
TPS Heaters
Original TPS052GT10-000 | Engine Heater
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 150 CID (2.5L)
- Volts: 240v – kW: 0.5 – AMPS: 2.1 – 60Hz
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: TPS052GT10000 -
CB Heaters
Original CB120810-200 | Engine Heater
- HOTSTART CB120810-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1208A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 600 CID (8.2 – 9.8L)
- Volts: 208v – kW: 2.0 – AMPS: 9.6 – 60Hz -Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: CB120810200 -
CL Style Heaters
Original CL150212-200 | Engine Heater
- HOTSTART CL150208-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 1350 – 1650 CID (22.1 – 27.0L)
- Volts: 240v – kW: 5.0 – AMPS: 20.8 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
Call for Quote for international purchases!
SKU: CL150212200 -
Pump Mounted
295 Series | Actuator
The 295 Series Electric Actuator is a second generation design more powerful than its predecessor. It is for Bosch-Style “P” 9 and 10 pumps fuel injected Pumps. Coupling the 295 Series with a fuel pump results in a high performance fuel control system without external linkages or brackets. Two isolated chambers eliminates the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 295 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducer and heavy duty bearing retention options are available.
Call for Quote for international purchases!
SKU: 295S
Products Grid
Best Sellers
-
Pump MountedADC100 | Actuator
$433.39 This product has multiple variants. The options may be chosen on the product page
-
Manual & Auto Start Control Modules, Remote Communications & Overview DisplaysOriginal DSE7310 MKII | Auto Start Control Module
Price range: $896.99 through $938.29 This product has multiple variants. The options may be chosen on the product page
Added
AVR | Generic Replacements
MX321 | Generic Replacement for Cummins MX321 Automatic Voltage Regulator
Features include:
Stability selection & adjustment *Under frequency roll off adjustment
Dip adjustment *Dwell adjustment
Droop adjustment *Trim adjustment
Over excitation adjustment *Over voltage adjustment
Current limit adjustment *Ramp adjustment
Call for Quote for international purchases!
SKU: MX321G
AVR | Generic Replacements
MX341 | Generic Replacement for Cummins MX341 Automatic Voltage Regulator
Features include:
Stability adjustment *Optimum response selection
Under frequency roll off adjustment *Dip adjustment
Droop adjustment *Trim adjustment
Over excitation adjustment
Call for Quote for international purchases!
SKU: MX341G
AVR | Generic Replacements
AVR AS480 | Generic
SENSING and POWER INPUT
Voltage: 100-264 Vac 1 phase
Frequency: 50-60 Hz Nominal
OUTPUT
Voltage: 82 Vdc @ 200 Vac power input
Voltage: 45 Vdc @ 110 Vac power input
Current: Continuous 5A
REGULATION
+/- 1.0%
THERMAL DRIFT
0.03% per deg. Change in AVR ambient
Call for Quote for international purchases!
SKU: AS480G
AVR | Generic Replacements
AVR R250 | Generic
Power Input: AC 80-140V (50 / 60Hz)
Maximum output: DC 90V / 6A / 10S
Detection voltage input: AC 115V
Voltage regulation rate: ≤ ± 1% External voltage trimming 1K / 2W potentiometer ± 10%
Voltage regulation +/- 0.5% at steady state and constant speed
Call for Quote for international purchases!
SKU: R250G
AVR | Generic Replacements
AVR R438 | Generic
Fuse: F1on X1,X2.10A;slow-250V
Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
Voltage regulation ± 0.5%
Normal or rapid response time via jumper ST2 (see below)
Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438G
AVR | Generic Replacements
AVR R448 | Generic
Voltage regulation ± 0.5%
Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation
Remote voltage adjustment range of: ± 5%
Call for Quote for international purchases!
SKU: R448G
AVR | Generic Replacements
AVR R450 | Generic
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
Shocks on the base: 9 g depending on the 3 axes.
Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450G
AVR | Generic Replacements
AVR SR7-2G (SR-7) | Generic
Sensing Input: Terminal 1,2 3,4 5,6 Can be connected to Y or 220~480VAC Single Phase 50/60HZ.
Power Input:50~280VAC (1,2) 50/60HZ.
Output Voltage: Maximum 90VDC @ 220VAC Harmonic Wave. Output Current: Continuous 6A Maximum 8A for 10 sec.
Call for Quote for international purchases!
SKU: SR72G-G
AVR | Generic Replacements
AVR VR6 | Generic
Power: Shunt Excited
Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase
PMG Excited 63-105 Vac 100/240 Hz 3 phase
Sensing input: 180-240 Vac, 50/60 Hz 1 OR 3 phase
CT input: 1 or 5 Aac 50/60 Hz
ACC input: +/- 3 Vdc. Output 65 Vdc @ 12 Adc
Unit Type: Potted – Rugged
Weight: 1.5 kgSize: 9.4 in x 7.1 in x 3.5 in
4 mounting holes
1 Year Warranty
Call for Quote for international purchases!
SKU: VR6G
Leroy Somer AVR
Leroy Somer AVR R450 | Original
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
Shocks on the base: 9 g depending on the 3 axes.
Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450
Leroy Somer AVR
Leroy Somer AVR R449 | Original
The regulator includes:
A main terminal strip (10 terminals)
A secondary terminal block (5 terminals)
A frequency selection terminal block (3 terminals) – A quadrature droop potentiometer
A voltage potentiometer
A stability potentiometer
A maximum excitation potentiometer
A sensing selection jumper ST1 (single/3-phase with an external module)
A response time jumper ST2 – A frequency selection jumper ST3 – An external voltage setting jumper ST4 – A LAM (load adjustment module) jumper ST5
From R449 Version E number 10,000, this jumper will be removable.
A selecti
Call for Quote for international purchases!
SKU: R449
Leroy Somer AVR
Leroy Somer AVR R448 | Original
Voltage regulation ± 0.5%
Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation
Remote voltage adjustment range of: ± 5%
Call for Quote for international purchases!
SKU: R448
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
Voltage regulation ± 0.5%
Normal or rapid response time via jumper ST2 (see below)
Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438
Leroy Somer AVR
Leroy Somer R250 | Original
Power Input: AC 80-140V (50 / 60Hz)
Maximum output: DC 90V / 6A / 10S
Detection voltage input: AC 115V
Voltage regulation rate: ≤ ± 1% External voltage trimming 1K / 2W potentiometer ± 10%
Voltage regulation +/- 0.5% at steady state and constant speed
Call for Quote for international purchases!
SKU: R250
