Shop
-
Magnetic Pickups
MSP6728C | Magnetic Pickup
3.19 in [81 mm] Thread Length • 6.25 in [159 mm] Harness • Packard Connector • Same as MSP6728 with Mating Connector Kit EC1350 • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP6728C -
Magnetic Pickups
MSP6729 | Magnetic Pickup
2.7 in [69 mm] Thread Length • 6 ft [1.8 m] Shielded Cable • Flying Leads • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP6729 -
Magnetic Pickups
MSP6730 | Magnetic Pickup
3/8 x 24 UNF-2A Threaded Magnetic Speed Pickup MSP6730
- 1.7 in [43 mm] Thread Length
- 6 ft [1.8 m] Shielded Cable
- Flying Leads
- Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP6730 -
Magnetic Pickups
MSP675 | Magnetic Pickup
3.19 in [81 mm] Thread Length • 7 in [178 mm] Harness • Flying Leads • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP675 -
Magnetic Pickups
MSP677 | Magnetic Pickup
3 in [76 mm] Thread Length • Military-Style Connector without Mating Half Connector • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP677 -
Magnetic Pickups
MSP678 | Magnetic Pickup
4.86 in [123 mm] Thread Length • Military-Style Connector without Mating Half Connector • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP678 -
Magnetic Pickups
MSP679 | Magnetic Pickup
3 in [76 mm] Thread Length • Military-Style Connector • Same as MSP677 except with Mating Connector Kit EC1100 (Straight) • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP679 -
AVR | Generic Replacements
MX321 | Generic Replacement for Cummins MX321 Automatic Voltage Regulator
Features include:
- Stability selection & adjustment *Under frequency roll off adjustment
- Dip adjustment *Dwell adjustment
- Droop adjustment *Trim adjustment
- Over excitation adjustment *Over voltage adjustment
- Current limit adjustment *Ramp adjustment
Call for Quote for international purchases!
SKU: MX321G -
AVR | Generic Replacements
MX341 | Generic Replacement for Cummins MX341 Automatic Voltage Regulator
- Features include:
- Stability adjustment *Optimum response selection
- Under frequency roll off adjustment *Dip adjustment
- Droop adjustment *Trim adjustment
- Over excitation adjustment
Call for Quote for international purchases!
SKU: MX341G -
-
CB Heaters
Original CB115208-200 | Engine Heater
- HOTSTART CB115208-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2L)
- Volts: 240v – kW: 1.5 – AMPS: 6.3 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
Call for Quote for international purchases!
SKU: CB115208200 -
CB Heaters
Original CB115210-200 | Engine Heater
- HOTSTART CB115210-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1152A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7 – 8.2L)
- Volts: 240v – kW: 1.5 – AMPS: 6.3 – 60Hz – Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: CB115210200 -
CB Heaters
Original CB120110-200 | Engine Heater
- HOTSTART CB120110-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1201A3-200
- Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 600 CID (8.2 – 9.8L)
- Volts: 120v – kW: 2.0 – AMPS: 16.7 – 60Hz – Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: CB120110200 -
CB Heaters
Original CB120210-200 | Engine Heater
- HOTSTART CB120210-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1202A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 500 – 600 CID (8.2 – 9.8L)
- Volts: 240v – kW: 2.0 – AMPS: 8.3 – 60Hz -Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: CB120210200 -
CB Heaters
Original CB125108-200 | Engine Heater
- HOTSTART CB125108-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 120v – kW: 2.5 – AMPS: 20.8 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
Call for Quote for international purchases!
SKU: CB125108200 -
CB Heaters
Original CB125110-200 | Engine Heater
- HOTSTART CB125110-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1251A3-200
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 120v – kW: 2.5 – AMPS: 20.8 – 60Hz -Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: CB125110200 -
CB Heaters
Original CB125200-000 | Engine Heater
- HOTSTART CB125200-000 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
Call for Quote for international purchases!
SKU: CB125200-000 -
CB Heaters
Original CB125210-200 | Engine Heater
- HOTSTART CB125210-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Replacement to CB1252A3-200
- Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
- Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
Call for Quote for international purchases!
SKU: CB125210-200 -
CB Heaters
Original CB125212-200 | Engine Heater
- HOTSTART CB125212-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
- Temperature Range: ON: 120°F (49°C) – OFF 140°F (60°C)
Call for Quote for international purchases!
SKU: CB125212200 -
CB Heaters
Original CB125800-000 | Engine Heater
- HOTSTART CB125208-200 Engine Heater – Weather-Tight Coolant preheater with Thermostat
- Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other – No pump needed (thermosiphon principle)
- Engine Displacement: 600 – 800 CID (9.8 – 13.1L)
- Volts: 240v – kW: 2.5 – AMPS: 10.4 – 60Hz – Single Phase
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
Call for Quote for international purchases!
SKU: CB125800-000 -
CTM HOTflow
Original CTM10110-N00 | HOTflow
- Part Number : CTM10110-N00 – 1000W – 120V – 100/120F – Coolant Systems
- Heating Fluid: Engine coolant (50% glycol/50% water)
- Heat Power: 1, 1.5, and 2.5 kW – Fixed Thermostat: 100°-120°F (38°-49°C)
- Flow: 3.5GPM (0.79 m3/hr) @ 3 PSI (21 kPa)
- UL/C-US listed models available – Compact design – Easy to install
Call for Quote for international purchases!
SKU: CTM10110-N00 -
CTM HOTflow
Original CTM15110-N00 | HOTflow
- Part Number: CTM15110-N00 – 1500W – 120V – 100/120F – Coolant Systems
- Heating Fluid: Engine coolant (50% glycol/50% water)
- Heat Power: 1, 1.5, and 2.5 kW – Fixed Thermostat: 100°-120°F (38°-49°C)
- Flow: 3.5GPM (0.79 m3/hr) @ 3 PSI (21 kPa)
- UL/C-US listed models available – Compact design – Easy to install
Call for Quote for international purchases!
SKU: CTM15110-N00 -
12 Volt Battery Chargers
Original DSE BC1205 | Battery Charger | DSE BC1205
VERTICAL MOUNT
50 mm x 129.6 mm x 138.5 mm 2.0” x 5.1” x 5.45”)
HORIZONTAL MOUNT
129.6 mm x 138.5 mm x 50 mm (5.1” x 5.45” x 2.0”)
WEIGHT
0.3kg
PRODUCT VARIANTS
BC1205-01 – 12 Volt 5 Amp Battery ChargerCall for Quote for international purchases!
SKU: BC1205-01
