ECC Series | Speed Controls
ECC Series – Genset Voltage Frequency / Isochronous Speed Control / Full PID Setting / Designed to Govern from Frequency Signal of an AC Generator / No Magnetic Speed Pickup Needed
The ECC speed control unit is an electronic device designed to control engine speed with precise response to transient engine loads changes. The closed loop speed control, when connected to a proportional actuator and supplied with a speed signal/ frequency from the main AC generator, will control a wide variety of engines in an isochronous mode. The speed signal input must be in the frequency range of 40 to 80 Hz.
Call for Quote for international purchases!
Part Numbers
| ECC328 | (CE) 12 or 24VDC / Light Force | |
Related products
-
Engine Mounted
110 Series | Actuator
The 110 Series Integral Actuator is designed to mount directly to DEUTZ 1011 series 2, 3 and 4 cylinder engines in place of the electric stop solenoid and available in 12 and 24 VDC. GAC’s unique linear electromechanical technology provides proportional actuator movement, based on actuator coil current. This unique, optimum fuel control, actuating device will outperform externally mounted types of electric actuators. An integral’ high performance speed control system results when the 110 Series electric actuator in installed on the engine and electrically connected to complementing governor system components. no external linkages or brackets are required and no extra DEUTZ parts are needed.
Call for Quote for international purchases!
SKU: 110S -
Magnetic Pickups
MSP6723C | Magnetic Pickup
3.13 in [79 mm] Thread Length • 3 in [76 mm] Harness • Automotive Connector • Same as MSP6723 with Mating Harness CH1206 • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
v
SKU: MSP6723C -
Analog Speed Controls
ESD5526E | Speed Controls
Multi-V DC • Light-Force (Low-Current Optimized PID) • Anti-Windup Circuit (Gaseous) • Recommended for T1/T2 ATBs
- Switchable droop control
- Adjustable PID
- Idle speed adjustment
- Auxiliary accessory inputs
- Speed ramping
- Soft coupling
Call for Quote for international purchases!
SKU: ESD5526E -
Magnetic Pickups
MSP6730 | Magnetic Pickup
3/8 x 24 UNF-2A Threaded Magnetic Speed Pickup MSP6730
- 1.7 in [43 mm] Thread Length
- 6 ft [1.8 m] Shielded Cable
- Flying Leads
- Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP6730
