Original DSE9462 | Dual Output Intelligent Battery Charger
Out of stock
290 mm x 157 mm x 67 mm (9.4″ x 10.4 ” x 3.5″)
9462-01 – 24 Volt 15 Amp & 12 Volt 10 Amp Dual Output Intelligent Battery Charger (90-305v)
- Boosts and equalises cell charge to improve battery performance and life.
- Eco-Power mode.
- External system integration via J1939 CANbus.
Out of stock
|Intelligent two, three & four stage charging profiles.
|Provides safe and complete charging and charge maintenance of various battery types.
|Remote voltage sensing.
|To compensate for voltage drop due to cable resistance.
|Fully independent. Adjustable current limit on both charge outputs. Output 1 (24V) max 15 Amp. Output 2 (12V) max 10 Amp.
|Provides flexibility for multiple installation options.
|Can be used as a battery charger, power supply or both at the same time.
|Offers the flexibility of one product to cater for both installation requirements.
|Automatic or manual boost and storage charge functions to help maintain battery condition.
|Provides a faster charging cycle and automatically maintains a full charge
|Digital microprocessor technology.
|Provides accurate and reliable operation and safe charging and monitoring of various battery types.
|Low output ripple.
|Safe charging of both sealed and vented battery types.
|Four red indicator LEDs.
|Enables fault conditions to be resolved quickly and provides instant system information to aid preventative maintenance.
|AC input under/over voltage.
|Protects the charger and provides alarms in the event of an AC input failure.
|Battery charger output over voltage.
|Provides a warning that the battery voltage is above that specified for the type of battery.
|Battery charger output over current.
|Provides a warning that the battery is drawing a current above the configuration of the type of battery connected.
|Battery low voltage detection.
|Provides warning in the event that the battery voltage is low and may not be charging.
|Output short circuit and inversion polarity with auto recovery.
|Protects the charger in the event of a short circuit or crossed polarity with automatic charger on correction of the fault.
|Automatic power de-rating at high ambient temperatures.
|Prevents damage to the battery and charger caused by overcharging in warm climates.
|Optional battery temperature compensation using a PT1000 temperature sensor.
|Direct battery temperature measurement, Increases battery performance to the maximum possible at given temperature as specified by the battery manufacturer.
90 V to 305 V (L-N)
48 Hz to 64 Hz (L-N)
DC OUTPUT RATING
15 A DC at 24 V DC
10 A DC at 12 V DC
RIPPLE AND NOISE
2% x Vo
EFFICIENCY AND POWER FACTOR
>90% at 0.9pf
<0.5% x Vo
1% x Vo
TEMPERATURE SENSOR INPUTS
DC Under & Over Voltage
DC Over Current
AC Under & Over Voltage