MSP6723 | Magnetic Pickup
3.13 in [79 mm] Thread Length • 3 in [76 mm] Harness • Automotive Connector • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
$145.89
3.13 in [79 mm] Thread Length • 3 in [76 mm] Harness • Automotive Connector • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Downloads
Related products
-
Throttle Body
ATB T4 Series | Actuator
The ATB Series integral throttle body electric actuators are designed to control the air or air/fuel mixture to a gaseous-fueled engine. The design baseline for the ATB Series incorporates fast response and proven reliability to allow for efficient and precise control. The ATB Series actuator directly drives the throttle plate with internal return springs, insuring that the throttle plate returns to the minimum fuel position when the actuator becomes de-energized.
Call for Quote for international purchases!
SKU: ATBT4 -
Analog Speed Controls
ESD5340 | Speed Controls
ESD5340 Series Isochronous, Variable Speed, Droop Governing for Heavy Duty Actuators
- 24 V DC
- Full-Fuel Starting Aid
- Aux Input and +10 V DC Supply to support load sharing
- Two-element speed switch
- Speed ramping idle to operating speed
- Unique actuator power drive circuit
- Supports all GAC Actuators including the ACB2001
- Variable speed governing
- Protection against reverse battery voltage
- Enhanced start circuit for large-bore engines
Call for Quote for international purchases!
SKU: ESD5340 -
Engine Mounted
110 Series | Actuator
The 110 Series Integral Actuator is designed to mount directly to DEUTZ 1011 series 2, 3 and 4 cylinder engines in place of the electric stop solenoid and available in 12 and 24 VDC. GAC’s unique linear electromechanical technology provides proportional actuator movement, based on actuator coil current. This unique, optimum fuel control, actuating device will outperform externally mounted types of electric actuators. An integral’ high performance speed control system results when the 110 Series electric actuator in installed on the engine and electrically connected to complementing governor system components. no external linkages or brackets are required and no extra DEUTZ parts are needed.
Call for Quote for international purchases!
SKU: 110S -
Magnetic Pickups
MSP6724 | Magnetic Pickup
3.45 in [88 mm] Thread Length • 3 in [76 mm] Harness • Automotive Connector • Aluminum Gold Anodized
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP6724
