ESD1000 Series | Speed Controls
ESD1000 Series – Isochronous Operation / Gain Adjustment / Hard Potted
The ESD1000 Series speed control unit is an all- electronic device designed to control engine speed with fast and precise response to transient load changes. This closed loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous mode. It is designed for high reliability and it’s hard-potted to withstand the engine environment.
Call for Quote for international purchases!
ESD1000 Series Isochronous Controllers
• Isochronous Operation
• Gain Adjustment
• Hard Potted
Part Numbers
| ESD1000 | (CE) 12 or 24VDC / Wire Leads | |
| ESD1100 | (CE) 12 or 24VDC / Terminal Strip | |
Related products
-
Universal
ACD175A-24 | Actuator
ACD175A-24 Actuator • 24 V DC • Packard Connector without Mating Connector • Double Rack Bearing • BYC ASIMCO KT283 Included
- Connects directly to fuel rack in place of mechanical governor
- Available with digital governors
- Manual shut-off mechanism
- Fast response; < 35 ms (10–90 %)
- Right-hand rack
Call for Quote for international purchases!
SKU: ACD175A-24 -
Throttle Body
ATB T2 Series | Actuator
The ATB Series integral throttle body electric actuators are designed to control the air or air/fuel mixture to a gaseous-fueled engine. The design baseline for the ATB Series incorporates fast response and proven reliability to allow for efficient and precise control. The ATB Series actuator directly drives the throttle plate with internal return springs, insuring that the throttle plate returns to the minimum fuel position when the actuator becomes de-energized.
Call for Quote for international purchases!
SKU: ATBT2 -
Analog Speed Controls
ESD5526E | Speed Controls
Multi-V DC • Light-Force (Low-Current Optimized PID) • Anti-Windup Circuit (Gaseous) • Recommended for T1/T2 ATBs
- Switchable droop control
- Adjustable PID
- Idle speed adjustment
- Auxiliary accessory inputs
- Speed ramping
- Soft coupling
Call for Quote for international purchases!
SKU: ESD5526E -
Magnetic Pickups
MSP6723C | Magnetic Pickup
3.13 in [79 mm] Thread Length • 3 in [76 mm] Harness • Automotive Connector • Same as MSP6723 with Mating Harness CH1206 • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
v
SKU: MSP6723C
