5/8 – 18 UNF Threaded | MPS
GAC’s Magnetic Speed Sensors are a rugged and economic solution for detecting engine speed. Sturdier than plastic sensors and outperforming semiconductor-type devices at high temperatures, GAC’s epoxy encapsulated sensors are unaffected by dust and dirt. Multiple sizes and customized configurations are available.
$500.00
The Magnetic Speed Sensor detects when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are produced by the sensor’s internal coil and sent to the speed control unit. The signal from the magnetic speed sensor, teeth per second (Hz.), is directly proportional to engine speed. Speed sensors are available in various lengths in both U.S. and metric threads. Wire leads, military connectors, packard connectors, automotive connectors or stud terminals are also available. Over 35 styles currently available.
Part Numbers
| Product # | Thread Length | Harness Length | Connector | With Mating Connector |
| MSP674 | 3 in [76mm] | High Output 913Ω | Military | No |
| MSP675 | 3.19 in [81mm] | 7 in [178mm] | Flying Leads | No |
| MSP676 | 5 in [127mm] | 1 ft [0.3m] | Flying Leads | No |
| MSP677 | 3 in [76mm] | na | Military | No |
| MSP678 | 4.86 in [123mm] | na | Military | No |
| MSP679 | 3 in [76mm] | na | Military | Yes |
| MSP6710 | 4.86 in [123mm] | na | Military | Yes |
| MSP6719 | 2.37 in [60mm] | 1ft [0.3m] Harness | Flying Leads | No |
| MSP6720 | 3.86 in [98mm] | 1ft [0.3m] Harness | Flying Leads | No |
| MSP6721 | 3.19 in [81mm] | 2.75 in [70mm] | Automotive | No |
| MSP6721C | 3.19 in [81mm] | 2.7 5in [70mm] | Automotive | Yes |
| MSP6722 | 2.37 in [60mm] | 6 in [152mm] | Push-On Terminals | No |
| MSP6728 | 3.19 in [81mm] | 6.25 in [159mm] | Packard | No |
| MSP6728C | 3.19 in [81mm] | 6.25 in [159mm] | Packard | Yes |
| MSP6732 | 3.16 in [80mm] | 3.25 in [82.6mm] | Dual Packard | No |
| MSP6732C | 3.16 in [80mm] | 3.25 in [82.6mm] | Dual Packard | Yes |
| MSP6743 | 3.5 in [89mm] | High Output 1.2kΩ | #8-32NC-2A Threaded Stud Terminals | No |
Related products
-
Analog Speed Controls
ESD5131 | Speed Controls
Multi-V DC • Light-Force (Low-Current Optimized PID) • For Cummins EFC Forward Acting (Normally Closed)
- Adjustable PID
- Idle speed adjustment
- Auxiliary accessory input
- Temperature-compensated available
- Soft coupling options available
- EFC reverse acting options available
- EFC forward acting
- Light-force option available
SKU: ESD5131 -
-
Magnetic Pickups
MSP6730 | Magnetic Pickup
3/8 x 24 UNF-2A Threaded Magnetic Speed Pickup MSP6730
- 1.7 in [43 mm] Thread Length
- 6 ft [1.8 m] Shielded Cable
- Flying Leads
- Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
SKU: MSP6730 -
Analog Speed Controls
ESD5340 | Speed Controls
ESD5340 Series Isochronous, Variable Speed, Droop Governing for Heavy Duty Actuators
- 24 V DC
- Full-Fuel Starting Aid
- Aux Input and +10 V DC Supply to support load sharing
- Two-element speed switch
- Speed ramping idle to operating speed
- Unique actuator power drive circuit
- Supports all GAC Actuators including the ACB2001
- Variable speed governing
- Protection against reverse battery voltage
- Enhanced start circuit for large-bore engines
SKU: ESD5340
