The AS440 ( + Kit replaces SX440 ; SA465) is a half-wave phase-controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes underspeed and sensing loss protection to ensure safe, reliable control of the generator.
Stamford AVR
Stamford AVR AS440 | Original
Features include:
- Stability adjustment
- Optimum response selection
- Under frequency roll off adjustment
- Droop adjustment
- Trim adjustment
$730.00
Related products
-
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
SKU: R438 -
AVR | Generic Replacements
Stamford AVR AS480 | Generic
SENSING and POWER INPUT
- Voltage: 100-264 Vac 1 phase
- Frequency: 50-60 Hz Nominal
OUTPUT
- Voltage: 82 Vdc @ 200 Vac power input
- Voltage: 45 Vdc @ 110 Vac power input
- Current: Continuous 5A
REGULATION
- +/- 1.0%
THERMAL DRIFT
- 0.03% per deg. Change in AVR ambient
SKU: AS480G$95.00 -
AVR | Generic Replacements
Leroy Somer AVR R450 | Generic
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
- Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
- Shocks on the base: 9 g depending on the 3 axes.
- Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
SKU: R450G$199.99 -
Leroy Somer AVR
Leroy Somer AVR R449 | Original
The regulator includes:
- A main terminal strip (10 terminals)
- A secondary terminal block (5 terminals)
- A frequency selection terminal block (3 terminals) – A quadrature droop potentiometer
- A voltage potentiometer
- A stability potentiometer
- A maximum excitation potentiometer
- A sensing selection jumper ST1 (single/3-phase with an external module)
- A response time jumper ST2 – A frequency selection jumper ST3 – An external voltage setting jumper ST4 – A LAM (load adjustment module) jumper ST5
- From R449 Version E number 10,000, this jumper will be removable.
- A selecti
SKU: R449
